Introduction
With the continuous progress of science and technology, digital control is more and more widely used in modern industry, especially in equipment such as punching machines, the importance of digital control is more and more prominent. In this paper, we will discuss the application of digital control and intelligent application in the electronic control system of HOWFIT DDH 400T ZW-3700 high-speed precision punching machine, as well as its impact on the improvement of the degree of intelligence and production efficiency.
Electronic control system design
HOWFIT DDH 400T ZW-3700 adopts the design of stand-alone electric control box + mobile operating station and eight groups of batch control, which not only makes the press have a higher degree of intelligence, but also improves the production efficiency. The structure of stand-alone electric control box + mobile operation desk makes operation more convenient, while the eight groups of batch control enables the press to carry out multiple processes at the same time, which greatly improves the production efficiency.
Safety System Analysis
As a powerful production equipment, the safety of the press is of utmost importance. DDH 400T ZW-3700 is equipped with safety light grating and front and rear safety gate devices, which are designed to guarantee the safe operation of the press. The safety encoder monitors the safety zone around the press and stops the system as soon as it detects the entry of a person or object, ensuring the safety of the operator. The front and rear safety gates provide a physical barrier to prevent people from accidentally entering the work area while the press is in operation, thus further enhancing operational safety.
DDH 400T ZW-3700 equipment configuration list and parameters
1. servo motor mold height adjustment
2. inching positioning function
3. digital mold height indicator
4. two sets of mis-feeding detection
5. 0°and 90°180°270°positioning function of single movement
6. mainframe positive reversal device
7. Hydraulic slider fixing device
8. Lubricating oil constant temperature cooling + heating device
9. Separate brake clutch
10. Independent electric control box + mobile operating table
11. working lamp
12. Maintenance tools and tool box
13. Eight groups of batch control
14. Lubrication circulating pump station
15. Safety grating (front and rear 2 groups)
16. Front and rear safety gate device
17. Double-head stocker: hydraulic, 600mm
18. S-type leveler: 600mm
19. Double servo feeder: 600mm
20. Mold lifter: W=50
21. Mold transfer arm + support base: L=1500
22 Spring-damped anti-vibration feet: spring-damped feet are directly coupled with the punching machine
23. Solenoid valve for scissors: Taiwan Yadek
24. thermostatic oil cooler: China Tongfei
25. Inclined slot controller: Japan Yamasha
26. Nominal force: 4000KN
27. Ability to generate point: 3.0mm
28. Stroke: 30mm
29. Stroke number: 80-250s.p.m
30. Closed height: 500-560mm
31. Table area: 3700x1200mm
32. Slide area: 3700x1000mm
33. Adjustment volume: 60mm
34. Drop hole: 3300x440mm
35. Motor: 90kw
36. Load capacity of upper mold: 3.5 tons
37. Feeding line height: 300±50mm
38 machine size: 5960*2760*5710mm
DDH 400T ZW-3700 Machine Features
1. three-section combination structure, twice the nominal force tensioning, good overall rigidity, deflection value control in 1/18000, to ensure the long-term stable operation of the punch press.
2. high-quality alloy castings, after stress relief treatment, excellent vibration damping performance, to ensure long-term accuracy.
3. key castings after finite element analysis, reasonable force, small deformation.
4. The slider adopts pre-stressed eight-face circular needle roller guide to ensure the perpendicularity and parallelism of the up and down movement of the slider, and improve the mold production cycle and durability.
5. reverse symmetry dynamic balancing device, balance the horizontal and vertical inertia force generated during operation, to ensure the smooth operation of the machine.
6. the connecting rod and six-point super close support part adopts high-speed and heavy-duty sliding bearing structure, which ensures the precision of the lower dead point and the stability in the stamping process.
7. large oil volume thin oil lubrication device, effectively take away the heat generated in the process of operation, to ensure the stability of the whole machine under the dead point precision.
8. airbag type static balance device, to ensure smooth operation, and in the die height adjustment of the transmission parts of the wear and tear of the effective control, improve the die adjusting mechanism.
For more information, please visit HOWFIT official website
For more details or purchasing inquiries, please contact:
howfitvincentpeng@163.com
sales@howfit-press.com
+86 138 2911 9086
Post time: Apr-17-2024